window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'UA-237323547-1');

How to Clean Double Glazed Windows and Keep Them Lasting Longer

Key Takeaways

  • Keep it gentle: a soft lint-free cloth and a mild solution clean double glazed windows well without damaging the glass or frames.
  • Avoid harsh products: scourers, steel wool, bleach and pressure washers can mark the glass, discolour the frames or damage the seals.
  • Look after the hidden parts: light lubrication of hinges and locks, and clear drainage holes, keep windows working smoothly.
  • Inspect as you clean: mist between the panes, gaps in the seals and new draughts are signs to call a professional.

How to Clean Double Glazed Windows: The Glass

You do not need special equipment to clean double glazed windows. A soft lint-free cloth works well, or a squeegee if you want a streak-free finish. Regular cleaning keeps the glass clear and helps your windows perform at their best.

Choose a gentle cleaning solution and keep it away from the frame as much as you can.

  • Vinegar solution: mix one part white vinegar with three parts water for an easy, effective cleaner.
  • Washing-up liquid: dilute a little in water to cut through greasy marks.
  • Glass cleaner: fine to use, but do not let it run down and sit on the plastic of the frame.
  1. Spray your chosen solution onto the glass.
  2. Wipe it clean with the cloth or squeegee, working from the top down.
  3. Dry the glass well so you do not leave water marks.
  4. Repeat on the outside, using the same method for inside and outside glass.

What to Avoid When Cleaning the Glass

Some common cleaning shortcuts cause damage that is expensive to fix. A few simple rules protect both the glass and the frames.

  • Scourers and steel wool: abrasive materials can damage the glass and the frames.
  • Pressure washers: they are tempting for hard to reach exterior windows, but they can easily damage the seals, which can then let moisture in.
  • Runoff on the frame: some glass cleaners contain abrasive chemicals that can harm the plastic if they sit on it.

If your outside windows are easy to reach, you can clean them yourself. For upstairs or awkward windows, a local window cleaner will do a professional job.

Caring for uPVC Frames

Cleaning the frames is just as simple as cleaning the glass, and it is easiest to do both jobs at the same time. Frames collect less visible dirt than glass, so a gentle wipe is usually enough. uPVC needs very little upkeep, often just a wipe down with soapy water once in a while.

Clean the frames with the window open so you can reach every part of them. It also stops dirty water running down into the edges.

Product On uPVC frames? Why
Soft cloth and soapy water Yes Gentle enough for everyday cleaning
Vinegar and water solution Yes Cuts through light dirt without harsh chemicals
Old toothbrush Yes Reaches stubborn or hard to reach marks
Bleach or methylated spirits No Can discolour the frame
Abrasive creams or solvents No Can scratch and damage the surface

For very hard to remove marks, use only a cleaner made for uPVC windows. Learn more about what uPVC is and why it needs so little care.

Looking After Hinges, Locks and Handles

A little maintenance on the moving parts keeps your windows operating smoothly and working properly for longer. Do it as part of your regular clean, and more often if a window is opened a lot.

  1. Apply a few drops or a quick spray of silicone-based lubricant or light machine oil to the hinges, locks and handles.
  2. Work it in by turning the handles and opening and closing the window.
  3. Wipe away the excess so it cannot damage the frame.

Avoid penetrating oils such as WD-40. They do not dry to a non-stick coating, so the sticky residue collects dirt and makes the parts harder to operate over time. The solvents in them can also mark the plastic of the frame.

Check and Clear the Drainage Holes

Open your windows and you will see drainage holes in the bottom of the frame. They let rainwater and condensation escape safely instead of building up. When dirt blocks them, moisture can collect in the frame.

  1. Look for the holes along the bottom of the open frame.
  2. Pour in a small amount of water to check that it drains away.
  3. Clear any blockage with a small brush or a cotton bud.

Check them every few months. Regular checks of the seals and drainage holes matter more to the life of a window than most people expect.

Inspect the Seals While You Clean

Cleaning is the best time to spot a developing problem. A quick look around each window can save you a bigger repair later, and it only takes a minute.

  • Seals: check that they fit snugly in the frames, with no cracks or gaps.
  • Draughts: run your hand around the edges and feel for moving air.
  • Mist or droplets between the panes: this points to a failed seal, which we explain in our guide to moisture between the panes.
  • Stiff operation: a window that is hard to open or close needs a closer look.

When to Call a Professional

Most window care is easy to do at home, but some problems are best left to a professional. Call for help if you notice any of these signs.

  • Persistent draughts: air still gets in after you have checked the seals.
  • Difficulty opening or closing: lubricating the hardware has not helped.
  • Condensation between the panes: the sealed unit has failed, and the unit generally needs to be replaced.
  • Damaged seals: they may let moisture into the frame or the glass unit.

With regular care, your double glazed windows can last 20 to 30 years. Ours are also backed by our 12 year ‘no worries’ guarantee.

Frequently Asked Questions

How often should I clean double glazed windows?

Clean the glass whenever it looks dull, and give the windows and frames a proper clean every few months. Frames collect less visible dirt than glass, so it is easiest to do both jobs together. Check the seals and drainage holes at the same time to catch problems early.

Can I use a pressure washer on double glazed windows?

It is best not to. A pressure washer can easily damage the window, particularly the seals, which can then let moisture in and cause a whole host of problems. Use a soft cloth, a gentle solution and a squeegee instead, or ask a local window cleaner for hard to reach glass.

Can I use WD-40 on window hinges?

Avoid it. Penetrating oils like WD-40 leave a sticky residue that collects dirt and makes the moving parts harder to operate, and the solvents can mark the plastic frame. Use a few drops of silicone-based lubricant or light machine oil instead, then wipe away any excess.

What should I use to clean uPVC window frames?

Use a soft cloth with soapy water or a vinegar and water solution, and an old toothbrush for stubborn marks. Do not use bleach, methylated spirits, abrasive creams or solvents, as they can discolour or scratch the frame. For very hard marks, choose a cleaner made for uPVC.

Talk to Ultimate Windows About Your Windows

Want windows that are easy to look after and built to last? Book your free measure and fixed-price quote online, or call our team on 1300 898 782 for friendly advice.

Share This Article:

Keep Up To Date With Our
Free Newsletter

Sign up to our newsletter to receive all our latest offers and expert advice straight to your inbox. Leave your details below and subscribe today!